ISOFLUX base

Plus d'informations

In plane flux
Pyramid and flux

ISOFLUX consists of a square coil of 24 turns. In the horizontal plane of the coil is calibrated a contour materializing a surface S in the induction field B of the coil.
The main purpose of this tool is to measure the flow Φ1 of B through the surface by measuring the normal component of the induction with the probe Inphynix M.
The pyramid offers another graduated contour surface to measure the flow Φ2. The experimental verification of Φ1=Φ2 reveals the conservativity of magnetic flux density characterized by the local property : div B=0.

Caractéristiques techniques :

24 turns Square coil (3 layers of 8 joined turns )
Wire diameter : 0.355 mm (conductor), 0.415 with insulating varnish
Mean square side: 320 mm
DC ohmic resistance : 5.4 Ω
Add – in limiting current resistor : 44.2 Ω (1%, 1 watt)
Maximum input applied voltage : +/- 20 V
BNC or bananas connectors
Full size: 325x325x267 mm
Material: ABS
Silk screened texts and inscriptions

(*) Inphynix reserves the right to modify the characteristics of the material described herein prior notice.

Les points forts :

Experiments close to the bases,
No needs of strong currents (less than100mA)
Robust ABS plastic fabrication
Silk screened texts and inscriptions
2 years warranty
attractive pricing

Expériences possibles :

Square coil symmetries
magnetic flux sampled through the plane of the coil
magnetic flux sampled through the pyramid surfaces
magnetic flux conservativity or Gauss's theorem for the magnetic flux density

Inphynix : Plug N' Work - Bâtiment D / 2, rue Jean Perrin - 14460 COLOMBELLES - Tél : +33 (0)2 31 46 22 78 / Fax : +33 (0)2 31 46 22 61 | Infos légales